Drywall Screws & Nails in Houston
Drywall & Plasterboard Nails
PC Drywall Nails
- Cupped head with smooth shank
- For attaching drywall to wood studs
- Phosphate coated to drive easily and not react with drywall compound
nail length
Gauge
head diameter
1-3/8” – 1-7/8”
13
5/16”
1-3/8”
14
1/4”
2-1/8” – 2-3/8”
11.5
3/8”
Electro-Galvanized Smooth Plasterboard Nails
- Flat, thin head with smooth shank and diamond point
- Used to install wall surfacing materials
- Slightly smaller head and thinner shank than drywall nails
nail length
Gauge
head diameter
1-1/4” – 1-1/2”
13
19/64”
Electro-Galvanized Ring Shank Plasterboard Nails
- Flat, thin head with ringshank and diamond point
- Used to install wall surfacing materials
- Slightly smaller head and thinner shank than drywall nails
nail length
Gauge
head diameter
1-1/4” – 1-1/2”
13
19/64”
Blued Plasterboard Nails
- Flat, thin head with smooth, ring shank and diamond point
- Used to install wall surfacing materials
- Slightly smaller head and thinner shank than drywall nails
- Blued is a sterilized finish
nail length
Gauge
head diameter
1-1/8” – 1-1/4”
13
19/64”
Drywall Screws
Phillips Bugle-Head Fine Thread Drywall Screws
- For use of attaching drywall to metal (20-25-gauge) studs
- May also be used to attach particle board,plywood or other soft woods
- Known as “all-purpose” or “multi-purpose” screws
Size
6x1” – 2-1/4”
8x2-1/2” – 3”
10x3-1/2” – 4”
Phillips Bugle-Head Coarse Thread Drywall Screws
- For use of attaching wood to wood, drywall to woodand interior wooden deck
- May also be used in many interior wood and fixture fastening applications
- Original and primary application of drywall to wood studs
Size
6x1” – 2”
8x2-1/2” – 3”
10x3-1/2” – 5”
Phillips Bugle-Head Phosphate Coated Self-Drilling Screws
- For attaching gypsum board to metal (14-20 gauge)
Size
6x1-1/8” – 6x1-7/8”
8x2-3/8” – 8x3”
Phillips Pan-Head Zinc Coated Self-Drilling Screws
- For metal to metal applications
Size
8x1/2” – 10x3/4
Self Drilling Zinc Drywall Screws
- For attaching drywall to metal (14-20 gauge) studs
- May also be used to attach plywood particle board and metal lath to metal
Size
6x1” – 6x1-7/8”
8x2-3/8” – 8x3”
Pan-Head Framing Black & Zinc Coated Self-Drilling Screws
- For attaching light gauge steel studs to track (up to 20-gauge)
Nail Size
DRIVE SIZE
7x7/16”
#2 Phillips
Phillips Pancake Framing Zinc Coated Self-Drilling Screws
- For metal to metal applications
NAIL SIZE
DRIVE SIZE
10x5/8”
#2 Phillips
Phillips Modified Truss Zinc Coated Self-Drilling Screws
- For attaching metal lath and stucco mesh to steel studs (12-20 gauge)
Nail Size
8x1/2” – 8x2-1/2”
Hex-Head Washer Zinc Coated Self-Drilling Screws
- For metal to metal applications for heavy gauge steel
NAIL SIZE
8x1/2” – 14x3/4”
Hanger Wire
We stock standard clip & pin, standard 90° clip, heavy-duty 90° clip, 135° clip and seismic plates.
Galvanized Hanger Wire – Straight & Cut
- Hanger wire is suspended from the underside of the floor structure to provide a structural support for drop, gypsum wallboard or plaster suspended ceilings
- Galvanized for corrosion resistance
available in 50# bundles
sIZE
12 ga x 6’ – 20’
9 ga x 12’ – 20’
8 ga – 12’ – 20’
available in 100 pcs per bundle
sIZE
12 ga x 4’ – 30’
9 ga x 8’ – 20’
8 ga x 6’ – 20’
Galvanized Hanger Wire – Pre-tied with 1-1/4” pin & clip
- Available in 100 pcs per bundle
sIZE
12 ga x 4’ – 20’
Acoustical Tie Wire – Galvanized U-Hank, Straight & Cut
- Galvanized soft annealed wire used in drywall and plaster construction to tie furring channels to main runner U-channels
- Also used to tie metal lath to channels in plaster construction
available in 25# hanks
sIZE
16 ga x 28”, 45”
18 ga x 28”, 45”
Eye Lag Screws
Eye Lag Screws
- Specifically created for attaching ceiling hanger wire to wood joists
- Eye lag screws feature a self-tapping sharp point for easier installation
available in 25# boxes
Size
1/4”x 3”
1/4”x 4”
Self-Drilling Eye Lag Screws
- Specifically created for attaching ceiling hanger wire to wood joists quickly and easily
- May be used to screw eye lags into wood or metal joists
available in 25# boxes
Size
1/4”x 3/4”
1/4”x 1-3/4”
Packaging for Nails and Screws
Accent Building Materials carriers a complete line of products, led by our unparalleled line of Striker® brand, offering outstanding value with uncompromised quality to meet all your construction needs. We offer both bulk and packaged fasteners. Both hand-drive and collated nails are available, in a variety of finishes including; bright electro-galvanized and hot dipped to meet your specific application requirements.
Our Packaging Includes
- 1 lb and 5 lb package boxes
- Plastic job-pack pails
- 50 lb. bulk boxes